CNC Machines

The AUTOPULIT CNC polishing machines are highly versatile. Their capacity, flexibility and technology make it possible to finish, brush and polish a wide variety of pieces, that previously required special solutions.

PIECE HOLDING TABLE

The piece holding table may have one, two or four work piece spindles with several heads in line for medium or big sized parts. A rotary table for TRANSFER CNC machines, with a capacity of 4 to 8 work piece spindles for small and medium sized parts.

WORKING HEAD

The UT-CNC "HD" working heads are extremely solid and their robustness avoids possible vibrations generated by the polishing tool. In standard execution, the heads installed are model HP for transfer rotary machines and HD for machines with working heads in line. All the movements are done on a linear pad and "BRUSHLESS" motors drive the ball screw.

SOFTWARE

The polishing software, specially developed by AUTOPULIT, allows quick and easy programming of any part by means of a "teach pendant" or "joystick" not requiring specialists. The finishing of the different areas of the parts is automatically achieved moving the head and the part with the teaching of the 5 or 6 axis.

ADDITIONAL OPTIONS

Available options are as follows: Devices to hold the parts using vacuum, pneumatic clamps, tailstock, etc. Piece holding pallets for automatic loading and unloading Magazine of tools (buffs and polishing wheels) Enclosure

APPLICATIONS

Water fittings, door furniture, silver, cookware, lamps, craftwork, aluminum and zamak castings, motorcycle and automobile parts, etc. For complex varied parts requiring a high quality finish.

OTHER MODELS OF CNC MACHINES

CNC machine with protection cabinet to contain dirt and compounds.

	Machine Model HD-II/2UT-CNC with automatic loading and unloading devices (for polishing aluminum motorcycle parts).

Machine Model HP-I/1UT-CNC with junior working head for a smaller series of varied and complex parts (with protection cabinet for noise and dust insulation).

	Machine Model HD"E"/1UT-CNC, special machine for polishing bent tubes (swimming pool ladders, automobile bumpers, etc.)

CNC polishing machine Model HD-I/1UT(D)-CNC with 1 double working head equipped with piece holding table for large parts.

	CNC polishing machine Model HD-II/2UT(D)-CNC with 2 working heads and 2 work piece spindles for finishing 2 parts simultaneously.

Machine Model HD-I/1UT(D)-CNC with 1 working unit to finish large parts such as satin finishing stainless steel doors.